REFLECTOR: Canard cover

[Chuck Jensen]

Pat,

I also have the 'big dog' house with 4 screws/tinnermans down each side, two across the top and one on the pointy tip.  I see absolutely no movement during any flight regime.  If yours is bulging 1/8" during hi-speed flight, additional fasteners do seem in order.

-----Original Message-----
From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org]On
Behalf Of Pat Shea
Sent: Tuesday, July 05, 2005 4:42 PM
To: Velocity Aircraft Owners and Builders list
Subject: Re: REFLECTOR: Canard cover


Maybe I didn't explain that very well. At 200KIAS, the
top surface of my canard cover sticks up about 1/8"
above the top surface of the fusulage in the middle.
The cover is over 1/2" thick. The removable dog house
(4-5" up from the canard) is a common mod which has
proven to be structurally sound. However, if I'm the
only one experiencing this, I'll need to look into it
further. More fasteners were on my list as a speed
mod.  

Pat

> Pat,
> 
> that would scare the crap out of me!!!  Have you
> thought about fastening
> it down better?
> 
> Scott


--- Scott Derrick <scott at tnstaafl.net> wrote:

> > Finally, It looks like you have fasteners running
> > across the top (front & back) of your doghouse
> cover.
> > I only have screws on the sides of mine and at
> cruise
> > it pops up (bulges) over 1/8" in the center.
> 

 



		
__________________________________ 
Yahoo! Mail 
Stay connected, organized, and protected. Take the tour: 
http://tour.mail.yahoo.com/mailtour.html 

_______________________________________________
To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector

Visit the gallery!  www.tvbf.org/gallery
user:pw = tvbf:jamaicangoose
Check new archives: www.tvbf.org/pipermail
Check old archives: http://www.tvbf.org/archives/velocity/maillist.html