REFLECTOR: Fuel Flow Sensor
Scott Derrick
scott at tnstaafl.net
Fri Jul 1 07:38:25 CDT 2005
Kurt,
My installation, had a flexible hose running from the servo to the
sensor mounted on the on the firewall, and then another flexible hose
from the sensor to the divider.
Scott
NMFlyer1 at aol.com wrote:
> There is no room there on my setup,
>
> Kurt
>
>
> As TEC says, the fuel flow should be right before the divider.
>
> Scott
>
> HYTEC45 at aol.com wrote:
>
> > Know nothing about a "auto" installation, or your type of fuel
> > injection, BUT can you place it just upstream of the divider leading
> > to the injectors? I placed mine between the servo and flow divder.
> > This meeters the actual flow going to the injectors.
> >
> > TEC
>
>------------------------------------------------------------------------
>
>_______________________________________________
>To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector
>
>Visit the gallery! www.tvbf.org/gallery
>user:pw = tvbf:jamaicangoose
>Check new archives: www.tvbf.org/pipermail
>Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
>
More information about the Reflector
mailing list