REFLECTOR: Power Panel

[Scott Derrick]

When I listed the deficiencies in my Factory panel, I was talking about 
Lanza's.

He's on the list so could address them if he chooses to.

Scott

At 06:17 PM 1/12/2005, you wrote:
>You can talk with Wayne Lanza of Composite Design.  Wayne has been working 
>with builders for quite some time, and until the hurricane trashed the 
>Velocity builders center he had an offce in the same hanger.  See 
><http://www.compositedesigninc.com>www.compositedesigninc.com , he 
>purchased 'Big Orange' from the factory and did a complete refurbishment 
>of the interior and panel, a picture is on his site.
>
>Bill
>
>
>-----Original Message-----
>From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org]On 
>Behalf Of HYTEC45 at aol.com
>Sent: Wednesday, January 12, 2005 1:16 PM
>To: reflector at tvbf.org
>Subject: REFLECTOR: Power Panel
>
>I am in the process of building a new panel.  I built mine over 11 years 
>ago, and am looking at the pre-made power panels in lieu of using switches 
>and breakers.  Looks like the way to go now days.  Any hints or tips 
>regarding these?  I know Velocity has them, along with ACS.  Any other sources?
>
>Thanks in advance,
>TEC
>
>_______________________________________________
>To change your email address, visit 
>http://www.tvbf.org/mailman/listinfo/reflector
>
>Visit the gallery!  www.tvbf.org/gallery
>user:pw = tvbf:jamaicangoose
>Check new archives: www.tvbf.org/pipermail
>Check old archives: http://www.tvbf.org/archives/velocity/maillist.html


"Those who sacrifice freedom to get security, deserve neither."
- Benjamin Franklin