REFLECTOR: Power Panel

Jim Sower canarder at frontiernet.net
Wed Jan 12 17:24:45 CST 2005


If you decide you need Nuckolls' book (the conventional wisdom is that 
everyone does) I ended up with an extra one.  You can have it for $20, I 
pay postage.
Jim S.

John Tvedte wrote:

>Well - you might want to look at Blue Mountain Avionics.... http://www.bluemountainavionics.com  go to the downloads section - and check out his wiring book. NOTE:  Personally, I'd be careful with what he says in the book.
> 
>Anywhere map sells the ExpBus products.... http://www.anywheremap.com/SearchResult.aspx?CategoryID=4
> 
>I will say however, that I subscribe to the Bob Nuckolls approach - http://www.aeroelectric.com
> 
>Of course, that is pretty much the switch and wire it method - although he is suggesting using fuse panels...
> 
>-----Original Message----- 
>From: reflector-bounces at tvbf.org on behalf of HYTEC45 at aol.com 
>Sent: Wed 1/12/2005 12:15 PM 
>To: reflector at tvbf.org 
>Cc: 
>Subject: REFLECTOR: Power Panel
>
>
>
>	
>	I am in the process of building a new panel.  I built mine over 11 years ago, and am looking at the pre-made power panels in lieu of using switches and breakers.  Looks like the way to go now days.  Any hints or tips regarding these?  I know Velocity has them, along with ACS.  Any other sources?
>	 
>	Thanks in advance,
>	TEC
>
>  
>
>------------------------------------------------------------------------
>
>_______________________________________________
>To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector
>
>Visit the gallery!  www.tvbf.org/gallery
>user:pw = tvbf:jamaicangoose
>Check new archives: www.tvbf.org/pipermail
>Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
>


More information about the Reflector mailing list