REFLECTOR: Engine Hard Points
Ron Brown
romott at adelphia.net
Sun Feb 20 09:46:19 CST 2005
Hi Joe,
There are no hard points for the engine mounts. Just layers of triax. See section 6.7.4 of the online manuals.
Ronnie
----- Original Message -----
From: Joe
To: Velocity Aircraft Owners and Builders list
Sent: Sunday, February 20, 2005 10:01 AM
Subject: REFLECTOR: Engine Hard Points
I am ready to position/bolt my engine/mount to the firewall. My circa 1995 builders manual seems to be lacking in the detail department. The manual shows hard points on the forward face of the firewall, but no hardpoints came with my kit or with the engine mount(173RG,Franklin) and no dimensions for the hardpoints are listed in my manual.
1. Can someone steer me to the right material and dimensions for these hardpoints?
2. Are hard points also used on the aft firewall face? If so same questions as above.
Thanks,
Joe
------------------------------------------------------------------------------
_______________________________________________
To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector
Visit the gallery! www.tvbf.org/gallery
user:pw = tvbf:jamaicangoose
Check new archives: www.tvbf.org/pipermail
Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.tvbf.org/mailman/private/reflector/attachments/20050220/12726c62/attachment.html
More information about the Reflector
mailing list