REFLECTOR: Main Gear Access Dimensions

[Randy Wharton]

No, not the nose gear. The long access cover that provides access to the
main gear hydraulic cylinder.
Randy W.
 
  _____  

From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org] On
Behalf Of Alex Balic
Sent: Saturday, February 19, 2005 9:49 AM
To: Velocity Aircraft Owners and Builders list
Subject: RE: REFLECTOR: Main Gear Access Dimensions
 
You mean for the nose gear right?    I think that Mark Machado gives the
dimensions in the videos....
-----Original Message-----
From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org]On
Behalf Of Randy Wharton
Sent: Saturday, February 19, 2005 8:28 AM
To: 'Velocity Aircraft Owners and Builders list'
Subject: REFLECTOR: Main Gear Access Dimensions
I'm working on the keel on my XL-RG, and I'm about to make the access cover
for the hydraulic cylinder for the main gear. I think the outline of the
access cover is supposed to be marked on the keel, but it's not marked on
mine. Can anyone provide the measurement from the front of the cover to the
canard bulkhead and how long the cover is supposed to be? I've looked at
photos that give me an idea, but I'd rather do it by the book. But the book
doesn't say!! Thanks a lot!
 
Randy Wharton
N248RB XL-RG
http://clik.to/velocity
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.tvbf.org/mailman/private/reflector/attachments/20050219/7c98ffd8/attachment.html