REFLECTOR: Alan Shaw Wings Question
Al Gietzen
ALVentures at cox.net
Sat Aug 6 10:05:18 CDT 2005
Larry;
This may be a bit late, but the first pic shows where I cut an opening at
the bottom of the rudder for access to the hardpoint. I then drilled and
tapped, installed the horn, and patched the hole. Pic 2 looks into the
bottom of the rudder to where the screws are.
Hope this helps,
Al
-----Original Message-----
From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org] On
Behalf Of Lawrence J. Epstein,MD
Sent: Friday, August 05, 2005 9:20 AM
To: 'Velocity Aircraft Owners and Builders list'
Subject: RE: REFLECTOR: Alan Shaw Wings Question
Do any of you have a picture you can send of that area, showing the
hardpoint/bellcrank?
_______________________________________________
To change your email address, visit
http://www.tvbf.org/mailman/listinfo/reflector
Visit the gallery! www.tvbf.org/gallery
user:pw = tvbf:jamaicangoose
Check new archives: www.tvbf.org/pipermail
Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Rudder horn1.JPG
Type: image/jpeg
Size: 22063 bytes
Desc: not available
Url : http://www.tvbf.org/mailman/private/reflector/attachments/20050806/6e184aa0/Rudderhorn1-0001.jpe
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Rudder horn2.JPG
Type: image/jpeg
Size: 33719 bytes
Desc: not available
Url : http://www.tvbf.org/mailman/private/reflector/attachments/20050806/6e184aa0/Rudderhorn2-0001.jpe
More information about the Reflector
mailing list