REFLECTOR: EGT Temps

[John Dibble]

Ron Brown wrote:

> John, try swapping the EGT to another cylinder and see if the problem
> moves with the probe.  If the high temp moves to the new cylinder,
> there is something wrong with the probe or wiring. If another probe
> shows the same rise, its time to find out what is wrong with that
> cylinder.  You didn't mention if your mag checks were ok.
>
> I have on mag and one EI, so the drop is different.  One time just
> after starting I switched off the EI and the egt went to 0 and it ran
> rough.  But it was ok after warming it up more.  I replaced the
> sparkplug anyway.  I think it helped a little, but not much.
>
> John
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.tvbf.org/mailman/private/reflector/attachments/20050428/b0d5951e/attachment.htm