REFLECTOR: Step
PUSHERPILOT at wmconnect.com
PUSHERPILOT at wmconnect.com
Thu Apr 21 23:18:26 CDT 2005
Jorge,
I installed a retractable step in my STD RG as follows:
Cut a 3/16" slot 5 1/2" long into a 5/8" ID Al tube and also cut a notch at
each end (see photo). Glass this tube to the floor of the A/C. Make a 5/8" OD
steel rod for the step with a tapped hole for an AN3 bolt. Put a spring into
the tube followed by the step. A coin slot in the end of the step will turn
the step out of the notch and pop out. Pull the step out and turn into the
outer notch. The end of the step is cut to be flush with the fuselage.
Mel Bina
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.tvbf.org/mailman/private/reflector/attachments/20050422/eb403367/attachment.htm
More information about the Reflector
mailing list