REFLECTOR: RE: REFLECTOR fast build kit

[Gilles Ross]

Is your antenna centered in the fuselage. Have you builded the antenna
yourself or did you buy it?
Gilles
----- Original Message ----- 
From: "John Dibble" <aminetech at bluefrog.com>
To: "Velocity Aircraft Owners and Builders list" <reflector at tvbf.org>
Sent: Monday, September 20, 2004 7:38 PM
Subject: Re: REFLECTOR: RE: REFLECTOR fast build kit


> I used structural adhesive when I installed the keel in my fast build.
Also, I
> installed the long antenna inside the keel.
>
> John
>
> Jack Sheehan wrote:
>
> > Giles,
> > You better check with the factory. I think on the fast builds they
> > actually use an adhesive under the Keel flanges when they install
> > them with the rivets. you should be able to see the black stuff under
> > the edges. They may put the hard points in or you may have to put
> > them in from the access holes in the side of the keel. You can make
> > the holes a lot bigger than in the plans I really like the access
> > plate covers some have used from a marine supply.
> > Jack
> > _______________________________________________
> > To change your email address, visit
http://www.tvbf.org/mailman/listinfo/reflector
> >
> > Visit the gallery!  www.tvbf.org/gallery
> > user:pw = tvbf:jamaicangoose
> > Check new archives: www.tvbf.org/pipermail
> > Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
>
>
> _______________________________________________
> To change your email address, visit
http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery!  www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html