REFLECTOR: Epoxy and Hardener

[Gilles Gratton]

Comment on epoxy,
                   While I was building, I got a nitrogen cylinder and every
time I opened any large container of resin or hardener to fill smaller
containers that I used daily, I flushed the air out of the can and replaced
it with nitrogen before putting the cap on.  Someone told me that the epoxy
would keep longer this way if it was not exposed to ordinary air.
         Probably an overkill, since I finished the Project in two years and
even those 5 gallon cans of epoxy were usually all used up within 6-9
months.
Gilles

-----Original Message-----
From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org]On
Behalf Of Chuck Jensen
Sent: 7 septembre 2004 11:45
To: 'amillin at sbcglobal.net'; 'Velocity Aircraft Owners and Builders
list'
Subject: RE: REFLECTOR: Epoxy and Hardener

Check old archives: http://www.tvbf.org/archives/velocity/maillist.html