REFLECTOR: Gear Leg Woes
mike deeter
iguanamagic at yahoo.com
Wed Oct 6 11:41:23 CDT 2004
Scott:
Thanks for the help. I'll talk to Brendan; I've just
been waiting til they dug themselves out. I'll try on
the 11th since they asked us to lay off til then.
Again, thanks.
Mike
--- Scott Derrick <scott at tnstaafl.net> wrote:
> Mike,
>
> At the factory Talk to Brendan about the gear.
>
> Maybe yours are already 1/2 an inch shorter than
> mine were? If not, its
> easy to shorten the other one.
>
> Scott
>
> At 08:25 PM 10/3/2004, you wrote:
> >Scott:
> >
> >Thanks for the guidance in the latest two posts.
> I'm
> >now out of town on business but itchin' to get back
> >and fix my gear. I won't be able to til about 3
> weeks
> >from now; by that time I'll also be able to talk to
> >the factory about any issues.
> >
> >I'm encouraged that the cores seem true and that it
> >wasn't hard to get them to fit in your wheel wells.
> >
> >However, you mention that the top of the gear where
> >the overcenter linkage attaches is 1/2" shorter.
> If I
> >was to only replace the left gear leg, wouldn't
> that
> >create a mismatch?
> >
> >Mike
> >
> >
> >--- Scott Derrick <scott at tnstaafl.net> wrote:
> >
> > > Mike,
> > >
> > > Just so I don't misunderstand, please confirm
> that
> > > you
> > > >only ground away the portions of layers that
> > > appeared
> > > >to be coming loose; most of my gear leg seems
> > > >unaffected. Also, that you replaced the ground
> > > away
> > > >glass w/ appropriate layers and overlap only on
> the
> > > >portions ground away?
> > >
> > > Grind or sand through the damaged layers. Use
> water
> > > to wet it out, that
> > > makes it easier to see the cracks or broken
> strands
> > > of glass. I went one
> > > layer below the damage just to be sure.
> > >
> > > Yes grind or sand the damaged section only, fair
> it
> > > out so you get about a
> > > 1/4 to 1/2 inch of overlap per layer. That means
> if
> > > you go through all 12
> > > layers that would create a fairing 3 to 6 inches
> > > wide on each side of the
> > > crack.
> > >
> > > Scott
> > >
> > > "Those who sacrifice freedom to get security,
> > > deserve neither."
> > > - Benjamin Franklin
> > >
> > > _______________________________________________
> > > To change your email address, visit
> > > http://www.tvbf.org/mailman/listinfo/reflector
> > >
> > > Visit the gallery! www.tvbf.org/gallery
> > > user:pw = tvbf:jamaicangoose
> > > Check new archives: www.tvbf.org/pipermail
> > > Check old archives:
> > >
> http://www.tvbf.org/archives/velocity/maillist.html
> > >
> >
> >
> >=====
> >*******************************************
> >Mike Deeter
> >N2011 Test Pilot
> >iguanamagic at yahoo.com
> >http://iguanamagic.siegesmund.org
> >*******************************************
> >_______________________________________________
> >To change your email address, visit
> >http://www.tvbf.org/mailman/listinfo/reflector
> >
> >Visit the gallery! www.tvbf.org/gallery
> >user:pw = tvbf:jamaicangoose
> >Check new archives: www.tvbf.org/pipermail
> >Check old archives:
> http://www.tvbf.org/archives/velocity/maillist.html
>
>
> "Those who sacrifice freedom to get security,
> deserve neither."
> - Benjamin Franklin
>
> _______________________________________________
> To change your email address, visit
> http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery! www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives:
> http://www.tvbf.org/archives/velocity/maillist.html
>
=====
*******************************************
Mike Deeter
N2011 Test Pilot
iguanamagic at yahoo.com
http://iguanamagic.siegesmund.org
*******************************************
More information about the Reflector
mailing list