REFLECTOR:Missing Cylinder

Tony Babb reflector@tvbf.org
Mon, 17 May 2004 14:19:07 -0700


John,

You could try switching the plugs one at a time with another cylinder, if
the misfire moves to the other cylinder you know it's the plug and which one
it is, if the misfire stays on #4 could be one of the wires, you could
switch them also if lengths allow.

Tony
SEFG 60% done, 80% to go.


My #4 cylinder is missing.  I have one Rose EI and one mag.  I checked and
adjusted the gaps (0.18
> and 0.28).  It ran fine for about 30 seconds and then started missing
again.  Any
> suggestions?  How often should the plugs be replaced?  Mine are Champion
REB32E and
> have 100 hours on them.
>