REFLECTOR:SL70 and KY96A pin-outs

Robert Trent reflector@tvbf.org
Sun, 9 May 2004 22:07:02 -0400


The EDMO Quick Shot ref manual has the King KY96A as follows

                 A                                                S
                 -----------------------------------
                |                        | |                          |
                 -----------------------------------
                1                     8 9                         15

6,15,F,S      Power Ground
8                 Mic Key shield ground
9                 Mic Key
J                 Mic Audio  (shield grounded to 8)
K               Intercom Mic Audio  (shield grounded to 8)
H               500 Ohm Audio Out
7                500 Ohm Audio Out Shield Ground
12,N,P,13,   (jumpered) Switched Power
14               27.5 VDC power In
R                27.5 VDC power In

10              Sq Test & Compression Test
11              Remote XFR
1                + 28 VDC Lighting High
B                N/C
A                DIM Select    (# note)
2                 DET Audio Out
M               XMIT Rec Interlock
L                AGC Test/Remote Chan Inc
E                4 Ohm Audio High
5                4 Ohm Audio Lo (shown as shield ground for E)
D               Aux Audio HI In 1
C               Aux Audio HI In 2
3                Aux Audio HI In 3
4               Aux Audio LO  (shown as shield ground for D,C,3)

# note For tracking of 28VDC Dimmer, connect pin A to ground. For tracking
14VDC Dimmer, Leave Pin A open. For continuous half brightness, connect Pin
A to A+.

Bob Trent
173 FG Elite.
Just back from the paint shop



>
> > I am planning to install an Apollo SL70 transponder and also a
Bendix/King
> > KY96A comm. Does anyone out there have the diagrams showing the
connector
> > pin-outs for these two products.
> >
> > Many thanks,
> >
> > Andreas
> >
>