REFLECTOR:Sealing Engine Bulkhead holes and ducts

KeithHallsten reflector@tvbf.org
Sat, 6 Mar 2004 12:23:10 -0800


As I recall, the electrical department at Home Depot has fire putty or
caulk.  You may have to ask the guy working the department - it's probably
tucked away fairly unobtrusively.  Any other supplier to commercial
electricians would probably also have it.
Keith Hallsten

----- Original Message ----- 
From: "Jim Agnew" <jim_agnew_2@yahoo.com>
To: "Velocity Reflector" <reflector@awpi.com>
Sent: Saturday, March 06, 2004 12:06 PM
Subject: REFLECTOR:Sealing Engine Bulkhead holes and ducts


> Good old RED high temp silicone gasket maker works just
> fine.  Some places carry it in a pressurized container with
> a long caulking type nozzle that makes filling around
> things easy.
> Jim
>
> James F. Agnew
> Jim_Agnew_2@Yahoo.Com
> Tampa, FL
> Velocity 173 Elite Aircraft Completed & Flying

----- Original Message ----- 
From: "Pat Shea" <xl340hp@yahoo.com>
To: <reflector@tvbf.org>
Sent: Saturday, March 06, 2004 11:43 AM
Subject: Re: REFLECTOR:Firewall penetrations (was Control Cables)

> Keith,
> Have you found a source for the fire putty? Thanks for
> the EPM-AV source - their 1" pass-through fitting is
> just what I needed.
> Pat