REFLECTOR: GEAR RETRACTION

[Al Gietzen]

Subject: REFLECTOR: GEAR RETRACTION

 

Everything went well ... but when putting the gear down ... the main gear
"over center" lock doesn't quite make it.  It is just tiny nudge away.  I
can see no place to adjust it.  Does the big spring simply have to work its
way out?

 

Are the gear legs fully into the sockets; or are the cables to the cylinder
rod maybe a little too tight.  Since the sockets should be formed to the
gear legs, and then glassed in place while seated snuggly on the legs and
the overcenter linkage locked; the sockets should not be the culprits
preventing the linkage from going to fully locked position.

 

Al

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.tvbf.org/mailman/private/reflector/attachments/20040626/f7c25f7d/attachment.htm