REFLECTOR: Securing Wires
Jim Agnew
jim_agnew_2 at yahoo.com
Fri Jun 25 14:41:27 CDT 2004
John,
I don't know what type of connectors you are using, however
I heat shrink over the connector and wire to strain and
vibration proof the wire to connector junction.
Jim
--- John Dibble <aminetech at bluefrog.com> wrote:
> I have learned how important it is to secure small wires
> in the engine
> compartment. In the past 6 months I have had three wires
> break at the
> connector. Two were not connected to the engine so I
> think air flow and
> not engine vibration is the cause. I thought the wires
> were secured
> adequately with plastic ties, but I guess more ties are
> needed.
>
> John
>
>
>
>
> _______________________________________________
> To change your email address, visit
> http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery! www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives:
> http://www.tvbf.org/archives/velocity/maillist.html
>
=====
James F. Agnew
Jim_Agnew_2 at Yahoo.Com
Tampa, FL
Velocity 173 Elite Aircraft Completed & Flying
More information about the Reflector
mailing list