REFLECTOR: 173 RG Fuel Lines
Joe
jewen at comporium.net
Sat Jun 12 19:13:30 CDT 2004
Scott, Alex,
Thanks for your feedback.
On the AN fittings should they be aluminum or steel? I would think aluminum but the online builder's manual lists part numbers for steel.
Thanks,
Joe
----- Original Message -----
From: Scott Baker
To: Velocity Aircraft Owners and Builders list
Sent: Saturday, June 12, 2004 6:21 PM
Subject: Re: REFLECTOR: 173 RG Fuel Lines
Use the 3/8" diameter vent lines and AN fittings throughout.
Fuel fittings can also be found at Earl's performance automotive supply.
Scott B.
----- Original Message -----
From: Joe
To: reflector at tvbf.org
Sent: Saturday, June 12, 2004 6:13 PM
Subject: REFLECTOR: 173 RG Fuel Lines
I sealed my first strake this morning and am ready this afternoon to install the fuel and vent lines. After reviewing my building instructions as well as the current instruction manual on line, I have found the instruction to be substantially different. My manual calls for using rubber automotive fuel hose between the fuel lines and the sump (2 lines each side to 4 fittings in the sump.) The new instructions call for combining lines via a tee and running aluminum all the way to the sump.
My manual and parts supplied call for 1/4' vent line and the new calls out 3/8.
Anyone have an opinion on the best approach?
Thanks,
Joe
----------------------------------------------------------------------------
_______________________________________________
To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector
Visit the gallery! www.tvbf.org/gallery
user:pw = tvbf:jamaicangoose
Check new archives: www.tvbf.org/pipermail
Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
------------------------------------------------------------------------------
_______________________________________________
To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector
Visit the gallery! www.tvbf.org/gallery
user:pw = tvbf:jamaicangoose
Check new archives: www.tvbf.org/pipermail
Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.tvbf.org/mailman/private/reflector/attachments/20040612/d8fb4171/attachment.htm
More information about the Reflector
mailing list