REFLECTOR: 173 RG Fuel Lines

[Scott Baker]

Use the 3/8" diameter vent lines and AN fittings throughout.
Fuel fittings can also be found at Earl's performance automotive supply.
Scott B.

  ----- Original Message ----- 
  From: Joe 
  To: reflector at tvbf.org 
  Sent: Saturday, June 12, 2004 6:13 PM
  Subject: REFLECTOR: 173 RG Fuel Lines


  I sealed my first strake this morning and am ready this afternoon to install the fuel and vent lines.  After reviewing my building instructions as well as the current instruction manual on line, I have found the instruction to be substantially different.   My manual calls for using rubber automotive fuel hose between the fuel lines and the sump (2 lines each side to 4 fittings in the sump.)  The new instructions call for combining lines via a tee and running aluminum all the way to the sump.

  My manual and parts supplied call for 1/4' vent line and the new calls out 3/8.

  Anyone have an opinion on the best approach?

  Thanks,
  Joe


------------------------------------------------------------------------------


  _______________________________________________
  To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector

  Visit the gallery!  www.tvbf.org/gallery
  user:pw = tvbf:jamaicangoose
  Check new archives: www.tvbf.org/pipermail
  Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.tvbf.org/mailman/private/reflector/attachments/20040612/9eebf56f/attachment-0001.htm