REFLECTOR: Spray Lat
Richard J. Gentil
richard at naples-air-center.com
Fri Jul 23 13:27:31 CDT 2004
Andy,
I used Mineral Spirits to get the old Duct Tape Goo off with.
Richard
Andy Millin wrote:
> Richard,Goo Gone should take that off for you. You'll need to let it
> soak in first.Andy
>
> -----Original Message-----
> From: reflector-bounces at tvbf.org
> [mailto:reflector-bounces at tvbf.org]On Behalf Of Richard J.
> Gentil
> Sent: Thursday, July 22, 2004 7:35 PM
> To: alex157 at direcway.com; Velocity Aircraft Owners and
> Builders list
> Subject: Re: REFLECTOR: Spray Lat
>
> Alex,
>
> The way I look at it, the Spray Lat cannot be any worse than
> the 8 year old duct tape I had to remove from the windows
> that had been baking in Travis' self storage unit all these
> years.
>
> The tape I removed had suffered from dry rott and came off
> in tiny pieces, leaving all the sticky mess all over the
> windows.
>
> [Image]
>
> Richard
>
> Alex Balic wrote:
>
> > I used it - works great for protecting, but I have heard
> > that it is
> > difficult to remove (have not tried that yet) really, I
> > don't think that you
> > can protect them better, I have dropped all kind of things
> > on the plexi
> > since it has been installed, and it hasn't even fazed the
> > spray lat- I did
> > not use it on the inside, because I hear that sometimes
> > you need to use a
> > wet towel to remove it and it is impossible to apply to
> > the insides of the
> > windows, so in there I have use plastic and the blue
> > masking tape- actually,
> > I bought a quart, and after many coats on all surfaces, I
> > have more than
> > half of it left, so if you want to make me a fair offer, I
> > will sell it to
> > you- it has been great stuff in my opinion.
> >
> > Alex
> >
> > -----Original Message-----
> > From: reflector-bounces at tvbf.org
> > [mailto:reflector-bounces at tvbf.org]On
> > Behalf Of Andy Millin
> > Sent: Wednesday, July 21, 2004 11:35 AM
> > To: reflector at tvbf.org
> > Subject: REFLECTOR: Spray Lat
> >
> > Has anyone used Spray Lat to protect their windows during
> > construction?
> >
> > How well did it work. Most of the negative comments I
> > have heard have
> > been from people that had not put on a thick enough
> > coating.
> >
> > Wicks sells it in a 1 quart container. Directions say it
> > must be
> > applied at least 3mm thick. How much will it take to do
> > the windshield
> > and rear windows?
> >
> > Thanks,
> >
> > Andy
> >
> > _______________________________________________
> > To change your email address, visit
> > http://www.tvbf.org/mailman/listinfo/reflector
> >
> > Visit the gallery! www.tvbf.org/gallery
> > user:pw = tvbf:jamaicangoose
> > Check new archives: www.tvbf.org/pipermail
> > Check old archives:
> > http://www.tvbf.org/archives/velocity/maillist.html
> >
> > _______________________________________________
> > To change your email address, visit
> > http://www.tvbf.org/mailman/listinfo/reflector
> >
> > Visit the gallery! www.tvbf.org/gallery
> > user:pw = tvbf:jamaicangoose
> > Check new archives: www.tvbf.org/pipermail
> > Check old archives:
> > http://www.tvbf.org/archives/velocity/maillist.html
>
> ----------------------------------------------------------------
> _______________________________________________
> To change your email address, visit
> http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery! www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives:
> http://www.tvbf.org/archives/velocity/maillist.html
>
-------------- next part --------------
Skipped content of type multipart/related
More information about the Reflector
mailing list