REFLECTOR: Spray Lat
Alex Balic
alex157 at direcway.com
Wed Jul 21 21:35:07 CDT 2004
I used it - works great for protecting, but I have heard that it is
difficult to remove (have not tried that yet) really, I don't think that you
can protect them better, I have dropped all kind of things on the plexi
since it has been installed, and it hasn't even fazed the spray lat- I did
not use it on the inside, because I hear that sometimes you need to use a
wet towel to remove it and it is impossible to apply to the insides of the
windows, so in there I have use plastic and the blue masking tape- actually,
I bought a quart, and after many coats on all surfaces, I have more than
half of it left, so if you want to make me a fair offer, I will sell it to
you- it has been great stuff in my opinion.
Alex
-----Original Message-----
From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org]On
Behalf Of Andy Millin
Sent: Wednesday, July 21, 2004 11:35 AM
To: reflector at tvbf.org
Subject: REFLECTOR: Spray Lat
Has anyone used Spray Lat to protect their windows during construction?
How well did it work. Most of the negative comments I have heard have
been from people that had not put on a thick enough coating.
Wicks sells it in a 1 quart container. Directions say it must be
applied at least 3mm thick. How much will it take to do the windshield
and rear windows?
Thanks,
Andy
_______________________________________________
To change your email address, visit
http://www.tvbf.org/mailman/listinfo/reflector
Visit the gallery! www.tvbf.org/gallery
user:pw = tvbf:jamaicangoose
Check new archives: www.tvbf.org/pipermail
Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
More information about the Reflector
mailing list