REFLECTOR: Spray Lat

[Ronnie Brown]

I used it and liked it. It does need to be put on thick.  I tried to spread
mine too thin first time and it was a bear to remove.  It probably didn't
help that I cleaned the glass with Windex before applying.  It made the
stuff stick too good.  Next time, I cleaned it with polish before applying
SprayLat.

But if you put it on thick, brushed on with at least two if not three coats
with a brush, it peels easily, does a great job of protecting.

The 1 quart bottle will easily cover the inside and outside windows.  If you
have a problem with an area that is not wanting to come off because it is
too thin, just brush more on and let it dry.

Ronnie

----- Original Message -----
From: "Andy Millin" <amillin at sbcglobal.net>
To: <reflector at tvbf.org>
Sent: Wednesday, July 21, 2004 1:34 PM
Subject: REFLECTOR: Spray Lat


| Has anyone used Spray Lat to protect their windows during construction?
|
| How well did it work.  Most of the negative comments I have heard have
| been from people that had not put on a thick enough coating.
|
| Wicks sells it in a 1 quart container.  Directions say it must be
| applied at least 3mm thick.  How much will it take to do the windshield
| and rear windows?
|
| Thanks,
|
| Andy
|
| _______________________________________________
| To change your email address, visit
http://www.tvbf.org/mailman/listinfo/reflector
|
| Visit the gallery!  www.tvbf.org/gallery
| user:pw = tvbf:jamaicangoose
| Check new archives: www.tvbf.org/pipermail
| Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
|