REFLECTOR: Radio Stack

[Alex Balic]

OK, I have it now- you just drill the front holes in the trays about 1"
further away from the front of the panel so they will be outside of the
offset area of the fiberglass- I have some .125 stock, I will just make a 2"
x 10" piece out of that......
  -----Original Message-----
  From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org]On
Behalf Of Brian Michalk
  Sent: Sunday, July 18, 2004 1:34 PM
  To: alex157 at direcway.com; Velocity Aircraft Owners and Builders list
  Subject: RE: REFLECTOR: Radio Stack


  Okay, go look again.  I hope this helps.  There are no blind holes.  With
this, you do have to drill some extra holes in the avionics trays, because
the mounting is offset from a normal installation.

   Brian Michalk  <http://www.michalk.com>
  Life is what you make of it ... never wish you had done something.
  Aviator, experimental aircraft builder, motorcyclist, SCUBA diver
  musician, home-brewer, entrepreneur and barely single


    -----Original Message-----
    From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org]On
Behalf Of Alex Balic
    Sent: Sunday, July 18, 2004 1:09 PM
    To: Velocity Aircraft Owners and Builders list
    Subject: RE: REFLECTOR: Radio Stack


    Thank you Brian  :)
    But the area at the panel offset still isn't clear to me- unlike the
angle that is closer to the center of the panel- there is no access to the
other side to install nuts because of the bump out- also, there is very
little room at all between the cut out edge, and the side of the bump out
(might be 1/8") it looks like you just put a flat piece of aluminum in
there- is it tapped for the mounting holes?, did you use self tapping screws
on that side?.

    Thanks,

    Alex
      -----Original Message-----
      From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org]On
Behalf Of Brian Michalk
      Sent: Sunday, July 18, 2004 11:44 AM
      To: Velocity Aircraft Owners and Builders list
      Subject: RE: REFLECTOR: Radio Stack


      Let's try that again to see if HTML format makes it without munging:


http://www.tvbf.org/gallery/index.php?dir=subsystems%2Finstrument_panel%2Fav
ionics_mounting%2F



       Brian Michalk  <http://www.michalk.com>
      Life is what you make of it ... never wish you had done something.
      Aviator, experimental aircraft builder, motorcyclist, SCUBA diver
      musician, home-brewer, entrepreneur and barely single


      > -----Original Message-----
      > From: reflector-bounces at tvbf.org
[mailto:reflector-bounces at tvbf.org]On
      > Behalf Of Brian Michalk
      > Sent: Sunday, July 18, 2004 12:36 PM
      > To: Velocity Aircraft Owners and Builders list
      > Subject: RE: REFLECTOR: Radio Stack
      >
      >
      > Here are some pictures of my instrument panel in progress.
      >
      > http://www.tvbf.org/gallery/index.php?dir=subsystems%2Finstrument_
      > panel%2Fav
      > ionics_mounting%2F
      >
      >  Brian Michalk  <http://www.michalk.com>
      > Life is what you make of it ... never wish you had done something.
      > Aviator, experimental aircraft builder, motorcyclist, SCUBA diver
      > musician, home-brewer, entrepreneur and barely single
      >
      >
      > > -----Original Message-----
      > > From: reflector-bounces at tvbf.org
[mailto:reflector-bounces at tvbf.org]On
      > > Behalf Of Brian Michalk
      > > Sent: Sunday, July 18, 2004 11:58 AM
      > > To: alex157 at direcway.com; Velocity Aircraft Owners and Builders
list
      > > Subject: RE: REFLECTOR: Radio Stack
      > >
      > >
      > > Stand by.
      > > I'll take some pictures of my panel in progress.
      > >
      > >  Brian Michalk  <http://www.michalk.com>
      > > Life is what you make of it ... never wish you had done something.
      > > Aviator, experimental aircraft builder, motorcyclist, SCUBA diver
      > > musician, home-brewer, entrepreneur and barely single
      > >
      > >
      > > > -----Original Message-----
      > > > From: reflector-bounces at tvbf.org
[mailto:reflector-bounces at tvbf.org]On
      > > > Behalf Of Alex Balic
      > > > Sent: Saturday, July 17, 2004 4:44 PM
      > > > To: Velocity Aircraft Owners and Builders list
      > > > Subject: REFLECTOR: Radio Stack
      > > >
      > > >
      > > > Anyone have some clear photos of exactly how the radio trays
      > > were attached
      > > > to the panel and to each other?
      > > >
      > > > _______________________________________________
      > > > To change your email address, visit
      > > > http://www.tvbf.org/mailman/listinfo/reflector
      > > >
      > > > Visit the gallery!  www.tvbf.org/gallery
      > > > user:pw = tvbf:jamaicangoose
      > > > Check new archives: www.tvbf.org/pipermail
      > > > Check old archives:
      http://www.tvbf.org/archives/velocity/maillist.html
      > >
      >
      > _______________________________________________
      > To change your email address, visit
      http://www.tvbf.org/mailman/listinfo/reflector

      Visit the gallery!  www.tvbf.org/gallery
      user:pw = tvbf:jamaicangoose
      Check new archives: www.tvbf.org/pipermail
      Check old archives:
http://www.tvbf.org/archives/velocity/maillist.html

      _______________________________________________
      To change your email address, visit
http://www.tvbf.org/mailman/listinfo/reflector

      Visit the gallery!  www.tvbf.org/gallery
      user:pw = tvbf:jamaicangoose
      Check new archives: www.tvbf.org/pipermail
      Check old archives:
http://www.tvbf.org/archives/velocity/maillist.html

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.tvbf.org/mailman/private/reflector/attachments/20040719/92f5d810/attachment.html