REFLECTOR:Alex...see attached...

Jack Sheehan reflector@tvbf.org
Tue, 6 Jan 2004 12:35:25 -0500


Scott,
The correct configuration is for the axle to be held in place by a 
set screw and a second set screw which is called the grub screw holds 
the set screw. The grub screw sticks out of the fork about 1/4 
inch..I have about 130 hours and mine has not moved. I have a slip 
mark painted on  the nose fork nut and the axle and grub screw. These 
get checked on pre-flight.
Is there anyone that has had the problem and has both the set and 
grub installed?

Jack
N55XL