REFLECTOR:Digifly EFIS

Wayne Lanza reflector@tvbf.org
Thu, 1 Jan 2004 20:06:32 -0500


Hi Robin,
  As the U.S. representative for Digifly, I naturally would be getting my
system at dealer cost... The systems are priced in Euros and the end
cost to the customer is based upon the exchange rate. At the current
exchange rate the systems cost would be:

Two Display System = about $12,000, includes the following:
2 fms100 displays (including Bezel mount face plate)
1 fms-ENG engine module (8 cylinder maximum module)
1 fms-AT AHRS
2 database cartridges (User selected)
1 Garmin16  WAAS GPS receiver
1 cable set (systems interconnect)
1 probe set (4 cylinder Lycoming or Continental, 6 cyl is available)

Three Display System = about $15,000, includes the following:
3 fms100 displays (including Bezel mount face plate)
1 fms-ENG engine module (8 cylinder maximum module)
1 fms-AT AHRS
3 database cartridges (User selected)
2 Garmin16  WAAS GPS receivers
1 cable set (systems interconnect)
1 probe set (4 cylinder Lycoming or Continental , 6 cyl is available)

  I have about $25,000 invested in my panel allowing for about $5,000
in labor needed to build it. I mention the labor because it is a real 
line
item and is often overlooked when estimating panel costs. Yes I built
this panel for myself, none the less it took several weeks to design,
build, wire and test...

Best Regards,
Wayne Lanza
______________________________________________________

On Thursday, January 1, 2004, at 03:13 PM, Robin Ream wrote:

> How much did your Digifly system end up costing you?
>  
> Robin