REFLECTOR: Firewall
Barber Law Firm
CBarber at TexasAttorney.net
Fri Aug 27 14:10:26 CDT 2004
MessageHmmm, I just received my SS week before last and it came as a big
sheet......not rolled up. Cost was about $170 for the "kit" (if memory
serves).
All the best,
Chris
Christopher Barber
Attorney and Counselor at Law
"Serving the needs of Senior Texans"
Barber Law Firm
11930 S Sam Houston Pkwy E
Suite 103
Houston, Texas 77089-4755
281-464-LAWS (5297)
CBarber at TexasAttorney.net
www.TexasAttorney.net
-----Original Message-----
From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org]On
Behalf Of Ronnie Brown
Sent: Monday, August 23, 2004 9:22 AM
To: amillin at sbcglobal.net; Velocity Aircraft Owners and Builders list
Subject: Re: REFLECTOR: Firewall
My factory SS fire wall kit came with wrinkles too. I used a fiber
burnishing pad to produce a machined finish on the SS. Mostly covers up the
wrinkles.
I read in VV that they were shipping the SS rolled up so that it doesn't
wrinkle as badly.
Ronnie
----- Original Message -----
From: Andy Millin
To: alex157 at direcway.com ; 'Velocity Aircraft Owners and Builders list'
Sent: Monday, August 23, 2004 10:06 AM
Subject: RE: REFLECTOR: Firewall
I thought I paid $99 for my Nomex SS firewall stuff from Velocity.
About the same as the pieces you bought. Only thing I didn't care for were
the wrinkles in the SS. I think the wrinkles are pretty common on the
factory stuff. For what I know it may be common with the material and
Velocity doesn't have any control over it.
-----Original Message-----
From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org]
On Behalf Of Alex Balic
Sent: Monday, August 23, 2004 9:59 AM
To: Velocity Aircraft Owners and Builders list
Subject: RE: REFLECTOR: Firewall
I purchased my SS from Wicks (somewhere around 60 bucks I think, and
ceramic fiber insulation from McMaster Carr for about $30 or so that did (2)
0.1" layers, and I still have about 50% of the roll left- the insulation is
good for over 2,000 degrees, I would assume that I would not be flying
anyway if the engine compartment reached that temp......
-----Original Message-----
From: reflector-bounces at tvbf.org
[mailto:reflector-bounces at tvbf.org]On Behalf Of Joe
Sent: Monday, August 23, 2004 6:44 AM
To: Velocity Aircraft Owners and Builders list
Subject: REFLECTOR: Firewall
Does anyone have any experience with the factory firewall materials?
Their price seems a bit high for a sheet of SS and some fiberglass, as
described by the factory. If anyone has purchased this material, would you
buy it again from the factory or just go to AS & S?
Thanks
Joe
----------------------------------------------------------------------------
_______________________________________________
To change your email address, visit
http://www.tvbf.org/mailman/listinfo/reflector
Visit the gallery! www.tvbf.org/gallery
user:pw = tvbf:jamaicangoose
Check new archives: www.tvbf.org/pipermail
Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.tvbf.org/mailman/private/reflector/attachments/20040827/f88e3016/attachment.html
More information about the Reflector
mailing list