REFLECTOR: Wing Storage Possibilities

[Andy Millin]

Ok Don....

'bout time you got hammsaircraft.com back online.  :)  and yes, I have
been checking.

How about updating the home page.  Last entry : 9-8-03 Engine and
install kit is sold! Plane kit is now $38,500 (minus the engine and
install kit)! A bargin!

Needs to be updated.


-----Original Message-----
From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org] On
Behalf Of Donald Hamm
Sent: Sunday, August 22, 2004 10:44 AM
To: 'Velocity Aircraft Owners and Builders list'
Subject: RE: REFLECTOR: Wing Storage Possibilities


Here is how I did mine in a 2 car...

http://www.hammsaircraft.com/chap2/storage.html

-----Original Message-----
From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org] On
Behalf Of Ronnie Brown
Sent: Sunday, August 22, 2004 9:39 AM
To: Velocity Aircraft Owners and Builders list
Subject: Re: REFLECTOR: Wing Storage Possibilities

Welcome to the Reflector, Jorge!

I hung my wings on the wall of a friends hanger.  I built my fuselage at
home in my one car garage while the fast built (Alan Shaw) wings were
stored at the hanger.

I built wing holders using 3/8 plywood cut to match the wing's leading
edge. I don't have pictures of the wall fixtures, but I later used these
pieces to build a roll around rack that would hold the two wings and
canard.  See http://home.sprintmail.com/~romott/page22.html

I used 2x4's and 2x2's sandwiched between two sheets of 3/8 plywood.  I
left space for cut pieces of 1.5" blue Styrofoam to cushion the
wings/canard in the holder.  Worked well.

Ronnie

----- Original Message ----- 
From: "Jorge Bujanda" <jbujanda at dslextreme.com>
To: "Velocity Builder's Forum. Reflector" <reflector at tvbf.org>
Sent: Sunday, August 22, 2004 9:19 AM
Subject: REFLECTOR: Wing Storage Possibilities


| I am looking for a practical storage/secure setup for the completed 
| wings. I will go to the factory late September to work on a Fast Build

| XL FG. In planning and setting up my garage, I would like to decide 
| what works best for me and build it beforehand, in preparation for 
| delivery. If you made a sketch to build yours and want to attach it, 
| feel free. :-)
|
| I am new to this forum but I can see the value of having such a 
| resource. So far, I've learned quite a few things by reading the 
| messages. Some other stuff involving explanations in building lingo is

| more difficult but I assume (or was that hope?) to understand better 
| once I get into building and deal with the manuals.
|
| Thanks in advance
| Jorge Bujanda
| XL FG
|
|
|
| _______________________________________________
| To change your email address, visit
http://www.tvbf.org/mailman/listinfo/reflector
|
| Visit the gallery!  www.tvbf.org/gallery
| user:pw = tvbf:jamaicangoose
| Check new archives: www.tvbf.org/pipermail
| Check old archives: 
| http://www.tvbf.org/archives/velocity/maillist.html


_______________________________________________
To change your email address, visit
http://www.tvbf.org/mailman/listinfo/reflector

Visit the gallery!  www.tvbf.org/gallery
user:pw = tvbf:jamaicangoose
Check new archives: www.tvbf.org/pipermail
Check old archives: http://www.tvbf.org/archives/velocity/maillist.html

_______________________________________________
To change your email address, visit
http://www.tvbf.org/mailman/listinfo/reflector

Visit the gallery!  www.tvbf.org/gallery
user:pw = tvbf:jamaicangoose
Check new archives: www.tvbf.org/pipermail
Check old archives: http://www.tvbf.org/archives/velocity/maillist.html