REFLECTOR: Nose gear Hydraulic Regulator
MMurp16900 at aol.com
MMurp16900 at aol.com
Sun Aug 8 09:44:45 CDT 2004
Hi Steve
Concerning restricting the flow to the nose gear door cylinder. I used a
brass 1/4 inch connector filled with solder and drilled out to 1/16 inch. Our
gear doors do not slam shut. Don't forget the spacer on the cylinder shaft,
that's what causes the high pressure switch to turn the pump off at the same
time the doors close.
Mack
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.tvbf.org/mailman/private/reflector/attachments/20040808/fb3c36d8/attachment.html
More information about the Reflector
mailing list