REFLECTOR:Buss material
reflector@tvbf.org
reflector@tvbf.org
Mon, 26 Apr 2004 16:42:55 -0400
On 26 Apr 2004 at 13:31, Al Gietzen wrote:
> I had the same concern about the thickness of my bus bar. Bob Nuckols told
> me that, in a DC circuit, it's the surface area, not the cross section, of
> I’ll have to take issue with Bob on this one – if that’s what he meant.
> It’s the cross-sectional area (and length) that determines resistance.
It must be a misunderstanding. The only time I've heard of the skin
effect - were it's the outer surface that carries the current - is at very
high frequencies.
---
David Parrish