REFLECTOR:lights
Scott Derrick
reflector@tvbf.org
Mon, 19 Apr 2004 17:04:14 -0600
So no lights if your dead stick at night??
I think I'd toss the oil pressure switch.
Scott
At 09:44 AM 4/19/2004, you wrote:
>Retract. The lights will be powered by a circuit tied to the the oil
>pressure and landing gear switches. I have to have both, oil pressure and
>landing gear down, for the lights to energize.
>
>Chuck
>-----Original Message-----
>From: reflector-admin@tvbf.org [mailto:reflector-admin@tvbf.org]On Behalf
>Of Robin Ream
>Sent: Monday, April 19, 2004 10:22 AM
>To: reflector@tvbf.org
>Subject: Re: REFLECTOR:lights
>
>Are you mounting those on a fixed gear or a retract?
>
>Robin
>----- Original Message -----
>From: <mailto:cjensen@dts9000.com>Chuck Jensen
>To: <mailto:'reflector@tvbf.org'>'reflector@tvbf.org'
>Sent: Monday, April 19, 2004 10:30 AM
>Subject: RE: REFLECTOR:lights
>
>I'm installing twin rectangular Xenon driving lights by mounting them as a
>sandwich on both sides of the nose gear. I decided to do something
>because I could never find a good place to store the white cane that I
>needed for taxiing at night. They're a tiny fraction of the cost of the
>"aviation" lights (under $100), but don't know how they work yet. Will
>post when I know.
>
>Chuck
>-----Original Message-----
>From: reflector-admin@tvbf.org [mailto:reflector-admin@tvbf.org]On Behalf
>Of NMFlyer1@aol.com
>Sent: Monday, April 19, 2004 9:53 AM
>To: reflector@tvbf.org
>Subject: Re: REFLECTOR:lights
>
>I thought about lights on the canard, but had already completed my glass
>work on the canard when I heard about it. I know that it can be hard to
>see when taxiing around the Airpark where I live and wanted something a
>little better. In an old V-V, I think Dave B. had a taxi bulb idea and I
>put that in my system... but there could be additional light.
>I am considering a HID light for the main light.
>
>Lopresti has a system, but it is overly expensive, and they won't even
>return calls or E-mails regarding the product. I do like the 17-degree
>option they offer though.
><http://speedmods.com/Boom_Beam/boom_beam_systems.htm>HID Boom Beam
>Aircraft Lighting - LoPresti Speed Merchants - Landing taxi recognition
>
>
>Aerovisions has a similar system at almost half the price (still
>expensive), and I plan on calling them regarding the best "intermediate"
>system.
><http://www.aerovisions.com/hid/>HID Xenon arc discharge aircraft landing,
>taxi and work lights
>
>The reasons I am even thinking about such a system are:
> The much lower current draw will eliminate the need for a landing
> light relay, and
> Give the system back about 4 amps.
>
> Less heat, much more light!! and a much longer bulb life.
>
>I did an experiment with the landing light in the V. I placed the light
>at the correct height on a pushcart, and at the same angle as in the
>airplane. I pointed it down the road at night and looked at the pattern
>and distance. The pattern was pretty small, and provided fairly good light
>Wayyyyy down there...in a small circle. I then put the halogen bulb
>(aircraft) replacement for the 4509 on the stand and tried again. There
>was a little more light, slightly brighter at the target, but still a
>small pattern.
>I ended up putting that bulb in the Cherokee and it works OK... but
>nothing spectacular.
>
>Since I rarely even use lights when I land (unless there is traffic in the
>area) I prefer more light in the taxi phase. It gets VERY dark when you
>taxi on unlit, unpainted roads through a neighborhood!!
>
>Other than the ridiculous price :).... Any input on the HID lights?
>
>Kurt Winker.
"Those who sacrifice freedom to get security, deserve neither."
- Benjamin Franklin