REFLECTOR:Stainless Tape

Sat, 17 Apr 2004 12:29:11 -0400 (EDT)

I didn't use a roller, just my fingers, but it seemed like there were no
voids.  I'll try the roller.
John

> John,  did you run a roller over the tape?  Really work it down so the
> adhesive really gets squished, no voids under it.
> nolan.
>
> ----- Original Message -----
> From: <aminetech@bluefrog.com>
> To: <reflector@tvbf.org>
> Sent: Friday, April 16, 2004 9:04 PM
> Subject: REFLECTOR:Stainless Tape
>
>
>> I replaced the stainless leading edge tape on my IVO prop with thicker
>> (0.003") tape from JC Whitney.  It went on good and looked good, but
>> one has come off after 10 hours.  Any ideas on how to make it stick
>> better? Would roughing the prop surface help?
>>
>> John
>>
>>
>> _______________________________________________
>> To change your email address, visit
> http://www.tvbf.org/mailman/listinfo/reflector
>>
>> Visit the gallery!  www.tvbf.org/gallery
>> user:pw = tvbf:jamaicangoose
>> Check new archives: www.tvbf.org/pipermail
>> Check old archives:
>> http://www.tvbf.org/archives/velocity/maillist.html
>>
>
>
> _______________________________________________
> To change your email address, visit
> http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery!  www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html