REFLECTOR:Jeffco and strakes

[CBarber]

Now that I looked further at the AS&S site, I remembered there is the fast
and medium harder (both available in one gallon "kits", so, I am thinking
two, one gallon kits).  Suggestions as to the fast or med hardener. The info
says the Medium is 30 minutes if I am reading it correctly....that sounds
pretty fast to me? Once again, Thanks.

All the best,

Chris


Christopher Barber
Attorney and Counselor at Law

"Serving the needs of Senior Texans"

Barber Law Firm
11930 S Sam Houston Pkwy E
Suite 103
Houston, Texas 77089-4755
281-464-LAWS (5297)


CBarber@TexasAttorney.net
www.TexasAttorney.net <http://www.TexasAttorney.net>

Texas <http://www.smileycentral.com/?partner=ZSzeb001>


-----Original Message-----
From: reflector-admin@tvbf.org [mailto:reflector-admin@tvbf.org]On
Behalf Of richard@riley.net
Sent: Friday, April 09, 2004 9:39 PM
To: reflector@tvbf.org
Subject: Re: REFLECTOR:Jeffco and strakes


At 09:34 PM 4/9/04 -0500, you wrote:
>If I have a good weekend and get my canard mounted I should be starting my
>strakes in the near future.  I am building a standard wing SE and was
>wondering about how much Jeffco I should need to coat the fuel area?
>
>AS&S has it in 8lb and 40lb amounts (I will see if I can get it from Velo).
>I assume I won't need the 40lb, but how many 8lb would y'all suggest
>(Hopefully only one <g>) TIA.

I'd actually suggest 2.  One will probably do it, but it's WAY easier to
pay to ship the second one back than to stop in the middle of the job and
wait for another delivery.

_______________________________________________
To change your email address, visit
http://www.tvbf.org/mailman/listinfo/reflector

Visit the gallery!  www.tvbf.org/gallery
user:pw = tvbf:jamaicangoose
Check new archives: www.tvbf.org/pipermail
Check old archives: http://www.tvbf.org/archives/velocity/maillist.html