REFLECTOR:Re: RVDT/LVDT Conditioner

Joe reflector@tvbf.org
Wed, 07 Apr 2004 22:56:56 -0400


Brian,
Thanks for your reply.  The best price on a conditioner I have found is a
unit designed for AI at about $125 per channel, so anything better that that
would be interesting.  I have also found an Analog Devices chip for about
$25, but don't really want to spend the time building a board when I am
trying to spend my time building an airplane.

What do have in mind when you mention DSP (I presume referring to Digital
Signal Processing.)  In my case I already have the gyro with RVDT sensors on
each axis, so the conditioner seemed to be the way to go to bring attitude
info to the CPU.

Joe


----- Original Message ----- 
From: "Brian Michalk" <michalk@awpi.com>
To: <reflector@tvbf.org>
Sent: Wednesday, April 07, 2004 9:59 PM
Subject: RE: REFLECTOR:Re: RVDT/LVDT Conditioner


> What do you consider low cost?
> I've found anything with LVDT is too expensive for what it does.  Of
course,
> I'm sure only a few thousand are sold each year.
>
> How about a DSP?
>
> I'm looking for a cheap electric gyro to do the same thing.
>
>  Brian Michalk  <http://www.michalk.com>
> Life is what you make of it ... never wish you had done something.
> Aviator, experimental aircraft builder, motorcyclist, SCUBA diver
> musician, home-brewer, entrepreneur and barely single
>
>
> > -----Original Message-----
> > From: reflector-admin@tvbf.org [mailto:reflector-admin@tvbf.org]On
> > Behalf Of Joe
> > Sent: Wednesday, April 07, 2004 8:35 PM
> > To: reflector@tvbf.org
> > Subject: REFLECTOR:Re: RVDT/LVDT Conditioner
> >
> >
> > Does anyone have a source for a low cost LVDT/RVDT conditioner,
> > specifically
> > I need a half bridge conditioner that operates on 12 or 24 Vdc.
> > I need the
> > conditioner to read the pick up coils from a G-519B-1 Attitude Gyro and
> > convert to a 0-10Vdc or 4-20mA signal.  I am planning on bringing these
> > signals into a PLC so I can program a low cost autopilot (wings
> > level, pitch
> > and alt hold.)   Any info or alternate approaches to integrate
> > the G-519B-1
> > is appreciated.
> >
> > Joe
> >
> > _______________________________________________
> > To change your email address, visit
> > http://www.tvbf.org/mailman/listinfo/reflector
> >
> > Visit the gallery!  www.tvbf.org/gallery
> > user:pw = tvbf:jamaicangoose
> > Check new archives: www.tvbf.org/pipermail
> > Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
> >
>
> _______________________________________________
> To change your email address, visit
http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery!  www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
>