REFLECTOR:Hookin up the brakes
Craig and/or Denise Woolston
reflector@tvbf.org
Wed, 10 Sep 2003 13:50:15 -0700
Andy-
From my extensive research, the Master cyclinder thread is British
Standard Pipe Taper of 1/8"-28. I was able to get this to 1/4 AN in steel
from Motion Industries (Bearing and Hydralic hose place). They got it from
a supplier by the name of Brennan Industries. I was even able to get a 90
deg elbow fitting since I felt it made for a better installation. We go
from that to a Matco parking brake valve and then on down the keel (XCFG
also) all 3003 Al lines for us.
Craig
!----------------------------!
! Craig Woolston !
! XL-FG in Palmdale, CA !
! cdwoolston@earthlink.net !
!----------------------------!
> -----Original Message-----
> From: reflector-admin@tvbf.org [mailto:reflector-admin@tvbf.org]On
> Behalf Of Andy Millin
> Sent: Tuesday, August 26, 2003 7:54 AM
> To: reflector@tvbf.org
> Subject: REFLECTOR:Hookin up the brakes
>
>
> Does anyone know the NAPA part number for specification for the master
> cylinder fitting for the brake line? I believe it is NPT to AN.
>
> Thanks,
>
> Andy
>
> _______________________________________________
> To change your email address, visit
> http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery! tvbf:jamaicangoose