REFLECTOR:Hookin up the brakes
KeithHallsten
reflector@tvbf.org
Wed, 3 Sep 2003 20:52:26 -0700
This is a multi-part message in MIME format.
------=_NextPart_000_000B_01C3725D.486C7BE0
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
Thanks, Al! =20
The Aeroquip FCM2941 is a AN-3 to 10mm x 1.0 straight steel adaptor. =
They are 13 bucks each at Martel Bros., but that's cheaper than having a =
couple of them custom-machined!
Keith
----- Original Message -----=20
From: Al Gietzen=20
To: reflector@tvbf.org=20
Sent: Monday, September 01, 2003 11:11 PM
Subject: RE: REFLECTOR:Hookin up the brakes
I found on the NAPA site that it is a metric M10 x 1. I'm going to
plumb with aluminum hard lines from the master cylinders back, so I =
need
to go from the M10x1 to an AN 3/16" fitting. I'm shaking my head
thinking that finding such a piece won't be easy, if it is possible at
all. Any suggestions would be appreciated.
Might not be so tough to find. The 10mm X 1 is a standard carburetor =
and/or fuel pump fitting. It may be tough to find direct to -3, so you =
may have to go -4 or -6 and then a reducer union. Try Baker Precision =
http://www.bakerprecision.com/adapt8b.htm , Earl's
or Martel Bros. Performance =
http://www.martelbros.com/cgi-bin/store/ws400CS.cgi?store=3DAQP&cart_id=3D=
1030902011124529&page=3Daeroquip/aeroquip.htm
If you don't find on the web sites, call.
Al
------=_NextPart_000_000B_01C3725D.486C7BE0
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.2800.1226" name=3DGENERATOR>
<STYLE>@font-face {
font-family: Verdana;
}
@font-face {
font-family: Nimrod;
}
@page Section1 {size: 8.5in 11.0in; margin: 1.0in 62.3pt 1.0in 62.3pt; }
P.MsoNormal {
FONT-SIZE: 12pt; MARGIN: 0in 0in 0pt; FONT-FAMILY: "Times New Roman"
}
LI.MsoNormal {
FONT-SIZE: 12pt; MARGIN: 0in 0in 0pt; FONT-FAMILY: "Times New Roman"
}
DIV.MsoNormal {
FONT-SIZE: 12pt; MARGIN: 0in 0in 0pt; FONT-FAMILY: "Times New Roman"
}
A:link {
COLOR: blue; TEXT-DECORATION: underline
}
SPAN.MsoHyperlink {
COLOR: blue; TEXT-DECORATION: underline
}
A:visited {
COLOR: purple; TEXT-DECORATION: underline
}
SPAN.MsoHyperlinkFollowed {
COLOR: purple; TEXT-DECORATION: underline
}
P.MsoPlainText {
FONT-SIZE: 11pt; MARGIN: 0in 0in 0pt; FONT-FAMILY: Nimrod
}
LI.MsoPlainText {
FONT-SIZE: 11pt; MARGIN: 0in 0in 0pt; FONT-FAMILY: Nimrod
}
DIV.MsoPlainText {
FONT-SIZE: 11pt; MARGIN: 0in 0in 0pt; FONT-FAMILY: Nimrod
}
DIV.Section1 {
page: Section1
}
</STYLE>
</HEAD>
<BODY lang=3DEN-US vLink=3Dpurple link=3Dblue bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2>Thanks, Al! </FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>The Aeroquip FCM2941 is a AN-3 to 10mm =
x 1.0=20
straight steel adaptor. They are 13 bucks each at Martel Bros., =
but that's=20
cheaper than having a couple of them custom-machined!</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>Keith</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<BLOCKQUOTE dir=3Dltr=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style=3D"FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV=20
style=3D"BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: =
black"><B>From:</B>=20
<A title=3DALVentures@cox.net href=3D"mailto:ALVentures@cox.net">Al =
Gietzen</A>=20
</DIV>
<DIV style=3D"FONT: 10pt arial"><B>To:</B> <A =
title=3Dreflector@tvbf.org=20
href=3D"mailto:reflector@tvbf.org">reflector@tvbf.org</A> </DIV>
<DIV style=3D"FONT: 10pt arial"><B>Sent:</B> Monday, September 01, =
2003 11:11=20
PM</DIV>
<DIV style=3D"FONT: 10pt arial"><B>Subject:</B> RE: REFLECTOR:Hookin =
up the=20
brakes</DIV>
<DIV><BR></DIV>
<DIV class=3DSection1>
<P class=3DMsoPlainText><FONT face=3DNimrod size=3D2><SPAN =
style=3D"FONT-SIZE: 11pt">I=20
found on the </SPAN></FONT>NAPA site that it is a metric M10 x =
1. I'm=20
going to</P>
<P class=3DMsoPlainText><FONT face=3DNimrod size=3D2><SPAN=20
style=3D"FONT-SIZE: 11pt">plumb with aluminum hard lines from the =
master=20
cylinders back, so I need</SPAN></FONT></P>
<P class=3DMsoPlainText><FONT face=3DNimrod size=3D2><SPAN=20
style=3D"FONT-SIZE: 11pt">to go from the M10x1 to an AN 3/16" =
fitting. I'm=20
shaking my head</SPAN></FONT></P>
<P class=3DMsoPlainText><FONT face=3DNimrod size=3D2><SPAN=20
style=3D"FONT-SIZE: 11pt">thinking that finding such a piece won't be =
easy, if=20
it is possible at</SPAN></FONT></P>
<P class=3DMsoPlainText><FONT face=3DNimrod size=3D2><SPAN=20
style=3D"FONT-SIZE: 11pt">all. Any suggestions would be=20
appreciated.</SPAN></FONT></P>
<P class=3DMsoPlainText><FONT face=3DNimrod size=3D2><SPAN=20
style=3D"FONT-SIZE: 11pt"></SPAN></FONT> </P>
<P class=3DMsoPlainText><FONT face=3DVerdana size=3D2><SPAN=20
style=3D"FONT-SIZE: 11pt; FONT-FAMILY: Verdana">Might not be so tough =
to=20
find. The 10mm X 1 is a standard carburetor and/or fuel pump=20
fitting. It may be tough to find direct to -3, so you may have =
to go -4=20
or -6 and then a reducer union. Try Baker Precision <A=20
=
href=3D"http://www.bakerprecision.com/adapt8b.htm">http://www.bakerprecis=
ion.com/adapt8b.htm</A>=20
, Earl=92s</SPAN></FONT></P>
<P class=3DMsoPlainText><FONT face=3DVerdana size=3D2><SPAN=20
style=3D"FONT-SIZE: 11pt; FONT-FAMILY: =
Verdana"></SPAN></FONT> </P>
<P class=3DMsoPlainText><FONT face=3DVerdana size=3D2><SPAN=20
style=3D"FONT-SIZE: 11pt; FONT-FAMILY: Verdana"> or Martel Bros.=20
Performance <A=20
=
href=3D"http://www.martelbros.com/cgi-bin/store/ws400CS.cgi?store=3DAQP&a=
mp;cart_id=3D1030902011124529&page=3Daeroquip/aeroquip.htm">http://ww=
w.martelbros.com/cgi-bin/store/ws400CS.cgi?store=3DAQP&cart_id=3D1030=
902011124529&page=3Daeroquip/aeroquip.htm</A></SPAN></FONT></P>
<P class=3DMsoPlainText><FONT face=3DVerdana size=3D2><SPAN=20
style=3D"FONT-SIZE: 11pt; FONT-FAMILY: =
Verdana"></SPAN></FONT> </P>
<P class=3DMsoPlainText><FONT face=3DVerdana size=3D2><SPAN=20
style=3D"FONT-SIZE: 11pt; FONT-FAMILY: Verdana">If you don=92t find on =
the web=20
sites, call.</SPAN></FONT></P>
<P class=3DMsoPlainText><FONT face=3DVerdana size=3D2><SPAN=20
style=3D"FONT-SIZE: 11pt; FONT-FAMILY: =
Verdana"></SPAN></FONT> </P>
<P class=3DMsoPlainText><FONT face=3DVerdana color=3Dblack =
size=3D2><SPAN=20
style=3D"FONT-SIZE: 11pt; COLOR: black; FONT-FAMILY: =
Verdana">Al</SPAN></FONT></P></DIV></BLOCKQUOTE></BODY></HTML>
------=_NextPart_000_000B_01C3725D.486C7BE0--