REFLECTOR:Hookin up the brakes
Al Gietzen
reflector@tvbf.org
Mon, 1 Sep 2003 23:11:24 -0700
This is a multi-part message in MIME format.
------=_NextPart_000_0001_01C370DE.5D480F00
Content-Type: text/plain;
charset="us-ascii"
Content-Transfer-Encoding: 7bit
I found on the NAPA site that it is a metric M10 x 1. I'm going to
plumb with aluminum hard lines from the master cylinders back, so I need
to go from the M10x1 to an AN 3/16" fitting. I'm shaking my head
thinking that finding such a piece won't be easy, if it is possible at
all. Any suggestions would be appreciated.
Might not be so tough to find. The 10mm X 1 is a standard carburetor
and/or fuel pump fitting. It may be tough to find direct to -3, so you
may have to go -4 or -6 and then a reducer union. Try Baker Precision
http://www.bakerprecision.com/adapt8b.htm , Earl's
or Martel Bros. Performance
http://www.martelbros.com/cgi-bin/store/ws400CS.cgi?store=AQP
<http://www.martelbros.com/cgi-bin/store/ws400CS.cgi?store=AQP&cart_id=1
030902011124529&page=aeroquip/aeroquip.htm>
&cart_id=1030902011124529&page=aeroquip/aeroquip.htm
If you don't find on the web sites, call.
Al
------=_NextPart_000_0001_01C370DE.5D480F00
Content-Type: text/html;
charset="us-ascii"
Content-Transfer-Encoding: quoted-printable
<html>
<head>
<META HTTP-EQUIV=3D"Content-Type" CONTENT=3D"text/html; =
charset=3Dus-ascii">
<meta name=3DGenerator content=3D"Microsoft Word 10 (filtered)">
<style>
<!--
/* Font Definitions */
@font-face
{font-family:Verdana;
panose-1:2 11 6 4 3 5 4 4 2 4;}
@font-face
{font-family:Nimrod;
panose-1:2 4 5 3 5 4 1 2 2 4;}
/* Style Definitions */
p.MsoNormal, li.MsoNormal, div.MsoNormal
{margin:0in;
margin-bottom:.0001pt;
font-size:12.0pt;
font-family:"Times New Roman";}
a:link, span.MsoHyperlink
{color:blue;
text-decoration:underline;}
a:visited, span.MsoHyperlinkFollowed
{color:purple;
text-decoration:underline;}
p.MsoPlainText, li.MsoPlainText, div.MsoPlainText
{margin:0in;
margin-bottom:.0001pt;
font-size:11.0pt;
font-family:Nimrod;}
@page Section1
{size:8.5in 11.0in;
margin:1.0in 62.3pt 1.0in 62.3pt;}
div.Section1
{page:Section1;}
-->
</style>
</head>
<body lang=3DEN-US link=3Dblue vlink=3Dpurple>
<div class=3DSection1>
<p class=3DMsoPlainText><font size=3D2 face=3DNimrod><span =
style=3D'font-size:11.0pt'>I
found on the </span></font>NAPA site that it is a metric M10 x 1. =
I'm
going to</p>
<p class=3DMsoPlainText><font size=3D2 face=3DNimrod><span =
style=3D'font-size:11.0pt'>plumb
with aluminum hard lines from the master cylinders back, so I =
need</span></font></p>
<p class=3DMsoPlainText><font size=3D2 face=3DNimrod><span =
style=3D'font-size:11.0pt'>to
go from the M10x1 to an AN 3/16" fitting. I'm shaking my =
head</span></font></p>
<p class=3DMsoPlainText><font size=3D2 face=3DNimrod><span =
style=3D'font-size:11.0pt'>thinking
that finding such a piece won't be easy, if it is possible =
at</span></font></p>
<p class=3DMsoPlainText><font size=3D2 face=3DNimrod><span =
style=3D'font-size:11.0pt'>all.
Any suggestions would be appreciated.</span></font></p>
<p class=3DMsoPlainText><font size=3D2 face=3DNimrod><span =
style=3D'font-size:11.0pt'> </span></font></p>
<p class=3DMsoPlainText><font size=3D2 face=3DVerdana><span =
style=3D'font-size:11.0pt;
font-family:Verdana'>Might not be so tough to find. The 10mm X 1 =
is a
standard carburetor and/or fuel pump fitting. It may be tough to =
find
direct to -3, so you may have to go -4 or -6 and then a reducer =
union.
Try Baker Precision <a =
href=3D"http://www.bakerprecision.com/adapt8b.htm">http://www.bakerprecis=
ion.com/adapt8b.htm</a>
, Earl’s</span></font></p>
<p class=3DMsoPlainText><font size=3D2 face=3DVerdana><span =
style=3D'font-size:11.0pt;
font-family:Verdana'> </span></font></p>
<p class=3DMsoPlainText><font size=3D2 face=3DVerdana><span =
style=3D'font-size:11.0pt;
font-family:Verdana'> or Martel Bros. Performance <a
href=3D"http://www.martelbros.com/cgi-bin/store/ws400CS.cgi?store=3DAQP&a=
mp;cart_id=3D1030902011124529&page=3Daeroquip/aeroquip.htm">http://ww=
w.martelbros.com/cgi-bin/store/ws400CS.cgi?store=3DAQP&cart_id=3D1030=
902011124529&page=3Daeroquip/aeroquip.htm</a></span></font></p>
<p class=3DMsoPlainText><font size=3D2 face=3DVerdana><span =
style=3D'font-size:11.0pt;
font-family:Verdana'> </span></font></p>
<p class=3DMsoPlainText><font size=3D2 face=3DVerdana><span =
style=3D'font-size:11.0pt;
font-family:Verdana'>If you don’t find on the web sites, =
call.</span></font></p>
<p class=3DMsoPlainText><font size=3D2 face=3DVerdana><span =
style=3D'font-size:11.0pt;
font-family:Verdana'> </span></font></p>
<p class=3DMsoPlainText><font size=3D2 color=3Dblack =
face=3DVerdana><span
style=3D'font-size:11.0pt;font-family:Verdana;color:black'>Al</span></fon=
t></p>
</div>
</body>
</html>
------=_NextPart_000_0001_01C370DE.5D480F00--