REFLECTOR:Door Switch Placement

Ronnie Brown reflector@tvbf.org
Tue, 14 Oct 2003 12:02:12 -0400


This is a multi-part message in MIME format.

------=_NextPart_000_001E_01C3924B.009B8320
Content-Type: text/plain;
	charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

I placed mine at the bottom of the bottom door latch socket.  Then I =
made a couple of smaller diameter aluminum tubes, cut to length and =
shaped so that when the door was locked completely, the switch just =
closed.  Has worked well in 90 hours.  I have them wired in parallel =
such that if either one closes, a door open light turns on.

I don't have any pictures but let me know if the above didn't make =
sense.
Ronnie


  ----- Original Message -----=20
  From: Brett Ferrell=20
  To: reflector velocity=20
  Sent: Tuesday, October 14, 2003 10:45 AM
  Subject: REFLECTOR:Door Switch Placement


  I've just installed my doors, and I see that I have these nifty =
microswitches in my kit, but no instructions on where best to install =
them.  Any ideas on what the preferred placement would be (and perhaps a =
picture)??  Thanks.

  Brett

------=_NextPart_000_001E_01C3924B.009B8320
Content-Type: text/html;
	charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 5.50.4134.600" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT size=3D2>I placed mine at the bottom of the bottom door latch =

socket.&nbsp; Then I made a couple of smaller diameter aluminum tubes, =
cut to=20
length and shaped so that when the door was locked completely, the =
switch just=20
closed.&nbsp; Has worked well in 90 hours.&nbsp; I have them wired in=20
parallel&nbsp;such that if either one closes, a door open light turns=20
on.</FONT></DIV>
<DIV><FONT size=3D2></FONT>&nbsp;</DIV>
<DIV><FONT size=3D2>I don't have any pictures but let me know if the =
above didn't=20
make&nbsp;sense.</FONT></DIV>
<DIV><FONT size=3D2>Ronnie</FONT></DIV>
<DIV><FONT size=3D2></FONT>&nbsp;</DIV>
<DIV><FONT size=3D2></FONT>&nbsp;</DIV>
<BLOCKQUOTE dir=3Dltr=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
  <DIV style=3D"FONT: 10pt arial">----- Original Message ----- </DIV>
  <DIV=20
  style=3D"BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: =
black"><B>From:</B>=20
  <A title=3Dbferrell@123mail.net =
href=3D"mailto:bferrell@123mail.net">Brett=20
  Ferrell</A> </DIV>
  <DIV style=3D"FONT: 10pt arial"><B>To:</B> <A =
title=3Dreflector@awpi.com=20
  href=3D"mailto:reflector@awpi.com">reflector velocity</A> </DIV>
  <DIV style=3D"FONT: 10pt arial"><B>Sent:</B> Tuesday, October 14, 2003 =
10:45=20
  AM</DIV>
  <DIV style=3D"FONT: 10pt arial"><B>Subject:</B> REFLECTOR:Door Switch=20
  Placement</DIV>
  <DIV><BR></DIV>
  <DIV><FONT face=3DArial size=3D2>I've just installed my doors, and I =
see that I=20
  have these nifty microswitches in my kit, but no instructions on where =
best to=20
  install them.&nbsp; Any ideas on what the preferred placement would be =
(and=20
  perhaps a picture)??&nbsp; Thanks.</FONT></DIV>
  <DIV><FONT face=3DArial =
size=3D2><BR>Brett</FONT></DIV></BLOCKQUOTE></BODY></HTML>

------=_NextPart_000_001E_01C3924B.009B8320--