REFLECTOR:Matco Brakes

[Kevin Baker]

Hey All,
I have a set of new Matco brakes that I am selling, if anyone is interested.
Nothing wrong with them, I'm just going to use clevelands instead.

I'm putting it out there for you guys 1st before I go "public".

I'll sell the calipers and brakes for $250, if you think that's fair.
I can send pictures if your interested or it'll help

Thanks,
Kevin Baker
jbak100@comcast.net
972-539-2133



At 08:05 AM 11/22/2003 -0700, you wrote:
>Speaking of brakes,  I rotated my main tires yesterday, inside to outside).
>
>I noticed the outside outer bearing on the right wheel had rotated 
>somewhat.  Enough to score the axle nut.  It was well lubed and there was 
>no play in the bearings before I removed the wheel, so I don't think I was 
>running them to loose.
>
>Anybody have this happen to them with Matco's?
>
>I'm going to replace the bearing just in case, but need a new axle nut.  I 
>tried to access Matco's web site but I get a blank page?  Maybe NAPA 
>carries the nut, I know they will have the bearing.
>
>Scott
>
>_______________________________________________
>To change your email address, visit 
>http://www.tvbf.org/mailman/listinfo/reflector
>
>Visit the gallery!  www.tvbf.org/gallery
>user:pw = tvbf:jamaicangoose
>Check new archives: www.tvbf.org/pipermail
>Check old archives: http://www.tvbf.org/archives/velocity/maillist.html