REFLECTOR:Front seat hard points

[Tony Babb]

Andy,

I hit the same problem with my SEFG, the measurements in the manual are just
plain wrong - at least the front/back distance is wrong. I discovered this
while I was at the Builders Center about a year ago and it was suggested to
me that they should be in front of the speedbrake cutout in the fuselage
floor by an inch or two, it was also suggested that I should leave it until
the very end to do this & that's what I've done - to be precise nothing !!

Cheers,

Tony
Top NACAs
----- Original Message -----
From: "Andy Millin" <amillin@net-link.net>
To: "Reflector" <reflector@www.tvbf.org>
Sent: Sunday, May 18, 2003 6:17 AM
Subject: REFLECTOR:Front seat hard points


> According to the manual, the rear, inboard, front seat hard points are
> supposed to be potted right where the speed brake hinges are.  I looked at
> the new version of the manual, and this mistake still seems to be there.
I
> want to get my seat mounts done before I put the top on my fuselage.  Can
> anyone tell me what the work around should be?
>
> Thanks,
>
> Andy
>
> _______________________________________________
> To change your email address, visit
http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery!  tvbf:jamaicangoose