REFLECTOR:Headset jack wiring
Scott Derrick
reflector@tvbf.org
Wed, 30 Apr 2003 18:41:21 -0600
Brett,
I think the AeroElectric web site has some hints. His book is cheap and
a must for any homebuilder doing his own wiring.
Think about powering ANR headsets which may require a 24/22 awg 12 vdc
wire to each headset location. You could run the wire and stub it off
for future upgrades.
Scott
Brett Ferrell wrote:
> Is there a good place to find out everything you need to know to wire
> your headet and microphone jacks? I've found some info, and it looks
> like I should run 20 ga shielded wire to each, 3 strand to the mic and 2
> strand to the headset, and solder them, but is it that simple?
>
> Brett