REFLECTOR:RE: Yo

[Mike Pollock]

Scott,

I apoligize for my short remarks as I must have misunderstood your post.
Yes, HP goes up with increasing RPM until the slope of the torque available
at the higher RPMs is decreasing too fast to keep the HP from increasing any
further. But you are dead on about the HP going up with RPM increase.  HP =
Torque x RPM ..

Mike



-----Original Message-----
From: Scott Derrick [mailto:scott@tnstaafl.net]
Sent: Wednesday, July 16, 2003 4:07 PM
To: m.pollock@verizon.net
Subject: Yo


Mike,

I was not trying to slam you in any way.

I was just trying to point out that HP can be raised by turning an
engine faster.  There are Lyc. IO360's  that are rated from 180 to 210
HP, the only difference is how fast the certification lets you run
them(RPM).

Scott