REFLECTOR: Exhaust systems
Scott Derrick
reflector@tvbf.org
Sun, 13 Jul 2003 20:42:30 -0600
My EI uses regular automotive ignition wires. You just clip the sensor
over the wire.
I'm not sure how it would work on shielded wires, though I think it
would work fine.
Scott
John Dibble wrote:
> Scott,
>
> Thanks. I thought I would have to get closer. Glad I don't have to. Were you able to pick up the signal
> through the insulated wire, or did you have to insert something more conductive?
>
> John
>
> Scott Derrick wrote:
>
>
>>John,
>>
>>I painted a white lines on the flywheel and quick epoxy'd a little white
>>stick on the case that stuck out towards the flywheel.
>>
>>Chocked the plane and had a friend I trusted sit in the plane with the
>>brakes on.
>>
>>Then I just stood in front of the strake(at the joining line to the
>>wing) on a small step ladder, leaned towards the engine and pointed the
>>gun at the flywheel. The white lines light up real well. from 4 or 5
>>feet away.
>>
>>Scott
>
>
>
> _______________________________________________
> To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery! tvbf:jamaicangoose
>