REFLECTOR: Exhaust systems

[Scott Derrick]

Rose must have some way of timing it?

Any induction type timing light will work?? How could it not?  You just 
clip the inductor over the plug wire, connect up your power(battery) and 
that's it?  It works with any spark plug wire, it doesn't matter if it 
powered by a mag, mechanical distributor or an EI.

I know the engine must be running to do this which is a drag, but its 
doable.

Scott

John Dibble wrote:
> Thanks.  Lightspeed says to use a timing light which is what I would expect.  I was told by Rose,
> however, that a timing light can not be used with my Rose EI, so I'm looking for other ways to
> confirm the correct timing.
> 
> John
> 
> Scott Derrick wrote:
> 
> 
>>I don't know if you have the lightspeed EI or not.
>>
>>Their manual is online at http://www.lightspeedengineering.com/  and has
>>detailed instructions on how to time any ignition.
>>
>>Scott
>>
> 
> 
> 
> _______________________________________________
> To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector
> 
> Visit the gallery!  tvbf:jamaicangoose
>