REFLECTOR: Exhaust systems
Pat Shea
reflector@tvbf.org
Wed, 9 Jul 2003 12:45:56 -0700 (PDT)
--- Jim Agnew <jim_agnew_2@yahoo.com> wrote:
> All of this talk about cooking props yet I have not
> seen any pictures of a charred or burning prop.
This
> sounds a lot like an urban legend. Does anyone have
> some pictures?
>
> Jim
No pics but...
Rodney Brim and the late Steve Drybread made a
serious attempt at a rear exiting exhaust for Rodney's
XL (IO-540 w/ 3 blade MT and I think one EI). They
tried many different configurations (pipes exiting out
the existing cowl openings, pipes exiting back thru
lower & outboard openings, pipe tips turned out...)
but were unable to prevent the exhaust from damaging
the blades. Steve did have success getting a similar
engine/exhaust combination to work on the Berkut, but
since they run a 2 blade fixed pitch prop there are
multiple clocking positions. There are only two
positions for clocking the MT on this motor.
Also, Scott Swing briefly tried a Berkut style rear
exiting exhaust on the XL prototype (IO-540 w/ 3 blade
MT) and blistered the prop.
Pat
__________________________________
Do you Yahoo!?
SBC Yahoo! DSL - Now only $29.95 per month!
http://sbc.yahoo.com