REFLECTOR:Cleveland Brakes

reflector@tvbf.org reflector@tvbf.org
Thu, 3 Jul 2003 09:31:01 EDT


--part1_157.20d27d73.2c358a15_boundary
Content-Type: text/plain; charset="US-ASCII"
Content-Transfer-Encoding: 7bit

BTW, if you did not get the assembly from V, then you will have to drill 
holes in the caliper plates in order to match them to the geometry of the gear leg 
and location of your brake line and pressure fitting.
Odd

--part1_157.20d27d73.2c358a15_boundary
Content-Type: text/html; charset="US-ASCII"
Content-Transfer-Encoding: quoted-printable

<HTML><FONT FACE=3Darial,helvetica><FONT  SIZE=3D2 FAMILY=3D"SANSSERIF" FACE=
=3D"Arial" LANG=3D"0">BTW, if you did not get the assembly from V, then you=20=
will have to drill holes in the caliper plates in order to match them to the=
 geometry of the gear leg and location of your brake line and pressure fitti=
ng.<BR>
Odd</FONT></HTML>

--part1_157.20d27d73.2c358a15_boundary--