REFLECTOR:roll over jigs

dean fitzbag reflector@tvbf.org
Tue, 1 Jul 2003 21:59:43 -0500


This is a multi-part message in MIME format.

------=_NextPart_000_0086_01C3401C.142D9760
Content-Type: text/plain;
	charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

I'll try that tomorrow.  Any ideas on how to apply the vacuum?
  ----- Original Message -----=20
  From: Brian Michalk=20
  To: reflector@tvbf.org=20
  Sent: Tuesday, July 01, 2003 6:15 PM
  Subject: RE: REFLECTOR:roll over jigs


  Get some small nylon tubing.  Hold one end to your ear, and snake the =
other end around like you are sniffing for something.  You'll hear it =
when you come across the leak.

  To patch the leak, put a slight vacuum on the tank, and dab on some =
epoxy/bubbles/cab-o-sil.

   Brian Michalk  <http://www.michalk.com>
  Life is what you make of it ... never wish you had done something.
  Aviator, experimental aircraft builder, motorcyclist, SCUBA diver
  musician, home-brewer, entrepreneur and mostly single
   =20

    -----Original Message-----
    From: reflector-admin@tvbf.org [mailto:reflector-admin@tvbf.org]On =
Behalf Of dean fitzbag
    Sent: Tuesday, July 01, 2003 5:17 PM
    To: reflector@tvbf.org
    Subject: Re: REFLECTOR:roll over jigs


    Yes, except for leak testing which is not going very well.  When I =
apply a small pressure I can hear the hissing of the air leaving =
somewhere.  I've applied soapy water everywhere I can see, but to no =
avail.  Using a brush taped to a long stick I have been painting the =
back bulkhead, but so far, no luck.
      ----- Original Message -----=20
      From: Mike Pollock=20
      To: reflector@tvbf.org=20
      Sent: Tuesday, July 01, 2003 1:41 PM
      Subject: RE: REFLECTOR:roll over jigs


      Hi Dean,

      Have you finished your stakes already?

      Mike Pollock
      EAA Tech Councelor #4357

        -----Original Message-----
        From: reflector-admin@tvbf.org =
[mailto:reflector-admin@tvbf.org]On Behalf Of dean fitzbag
        Sent: Sunday, June 29, 2003 1:00 PM
        To: reflector
        Subject: REFLECTOR:roll over jigs


        I am finished using the roll over jigs that I got form Alec =
Balic.   They are available to anyone who needs them for free.  I  live =
about 45 miles north of Dallas, Tx.
------=_NextPart_000_0086_01C3401C.142D9760
Content-Type: text/html;
	charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML xmlns:v xmlns:o><HEAD>
<META http-equiv=3DContent-Type =
content=3Dtext/html;charset=3Diso-8859-1>
<STYLE></STYLE>

<META content=3D"MSHTML 6.00.2800.1170" name=3DGENERATOR></HEAD>
<BODY id=3DMailContainerBody=20
style=3D"PADDING-LEFT: 10px; FONT-WEIGHT: normal; FONT-SIZE: 10pt; =
COLOR: #000000; BORDER-TOP-STYLE: none; PADDING-TOP: 15px; FONT-STYLE: =
normal; FONT-FAMILY: Verdana; BORDER-RIGHT-STYLE: none; =
BORDER-LEFT-STYLE: none; TEXT-DECORATION: none; BORDER-BOTTOM-STYLE: =
none"=20
leftMargin=3D0 topMargin=3D0 acc_role=3D"text" CanvasTabStop=3D"true"=20
name=3D"Compose message area"><?xml:namespace prefix=3D"v" =
/><?xml:namespace prefix=3D"o" />
<DIV=20
style=3D"FONT-WEIGHT: normal; FONT-SIZE: 10pt; COLOR: #000000; =
FONT-FAMILY: Verdana">
<DIV>I'll try that tomorrow.&nbsp; Any ideas on how to apply the =
vacuum?</DIV>
<BLOCKQUOTE dir=3Dltr=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
  <DIV style=3D"FONT: 10pt arial">----- Original Message ----- </DIV>
  <DIV style=3D"FONT: 10pt arial"><B>From:</B> <A=20
  href=3D"mailto:michalk@awpi.com">Brian Michalk</A> </DIV>
  <DIV style=3D"FONT: 10pt arial"><B>To:</B> <A=20
  href=3D"mailto:reflector@tvbf.org">reflector@tvbf.org</A> </DIV>
  <DIV style=3D"FONT: 10pt arial"><B>Sent:</B> Tuesday, July 01, 2003 =
6:15=20
PM</DIV>
  <DIV style=3D"FONT: 10pt arial"><B>Subject:</B> RE: REFLECTOR:roll =
over=20
  jigs</DIV>
  <DIV><BR></DIV>
  <DIV><SPAN class=3D976511223-01072003>Get&nbsp;some small nylon =
tubing.&nbsp;=20
  Hold one end to your ear, and snake the other end around like you are =
sniffing=20
  for something.&nbsp; You'll hear it when you come across the=20
leak.</SPAN></DIV>
  <DIV><SPAN class=3D976511223-01072003></SPAN>&nbsp;</DIV>
  <DIV><SPAN class=3D976511223-01072003>To patch the leak, put a slight =
vacuum on=20
  the tank, and dab on some epoxy/bubbles/cab-o-sil.</SPAN></DIV>
  <DIV>&nbsp;</DIV>
  <P>&nbsp;Brian Michalk&nbsp; &lt;<A href=3D"http://www.michalk.com/"=20
  target=3D_blank>http://www.michalk.com</A>&gt;<BR>Life is what you =
make of it=20
  ... never wish you had done something.<BR>Aviator, experimental =
aircraft=20
  builder, motorcyclist, SCUBA diver<BR>musician, home-brewer, =
entrepreneur and=20
  mostly single<BR>&nbsp; </P>
  <BLOCKQUOTE dir=3Dltr=20
  style=3D"PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px =
solid; MARGIN-RIGHT: 0px">
    <DIV class=3DOutlookMessageHeader dir=3Dltr align=3Dleft><FONT=20
    face=3DTahoma>-----Original Message-----<BR><B>From:</B>=20
    reflector-admin@tvbf.org [mailto:reflector-admin@tvbf.org]<B>On =
Behalf Of=20
    </B>dean fitzbag<BR><B>Sent:</B> Tuesday, July 01, 2003 5:17=20
    PM<BR><B>To:</B> reflector@tvbf.org<BR><B>Subject:</B> Re: =
REFLECTOR:roll=20
    over jigs<BR><BR></FONT></DIV>
    <DIV=20
    style=3D"FONT-WEIGHT: normal; FONT-SIZE: 10pt; COLOR: #000000; =
FONT-FAMILY: Verdana">
    <DIV>Yes, except for leak testing which is not going very =
well.&nbsp; When I=20
    apply a small pressure I can hear the hissing of the air leaving=20
    somewhere.&nbsp; I've applied soapy water everywhere I can see, but =
to no=20
    avail.&nbsp; Using a brush taped to a long stick I have been =
painting the=20
    back bulkhead, but so far, no luck.</DIV>
    <BLOCKQUOTE dir=3Dltr=20
    style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
      <DIV style=3D"FONT: 10pt arial">----- Original Message ----- =
</DIV>
      <DIV style=3D"FONT: 10pt arial"><B>From:</B> <A=20
      href=3D"mailto:m.pollock@verizon.net">Mike Pollock</A> </DIV>
      <DIV style=3D"FONT: 10pt arial"><B>To:</B> <A=20
      href=3D"mailto:reflector@tvbf.org">reflector@tvbf.org</A> </DIV>
      <DIV style=3D"FONT: 10pt arial"><B>Sent:</B> Tuesday, July 01, =
2003 1:41=20
      PM</DIV>
      <DIV style=3D"FONT: 10pt arial"><B>Subject:</B> RE: REFLECTOR:roll =
over=20
      jigs</DIV>
      <DIV><BR></DIV>
      <DIV><SPAN class=3D639143118-01072003>Hi Dean,</SPAN></DIV>
      <DIV><SPAN class=3D639143118-01072003></SPAN>&nbsp;</DIV>
      <DIV><SPAN class=3D639143118-01072003>Have you finished your =
stakes=20
      already?</SPAN></DIV>
      <DIV><SPAN class=3D639143118-01072003></SPAN>&nbsp;</DIV>
      <DIV><SPAN class=3D639143118-01072003>Mike Pollock</SPAN></DIV>
      <DIV><SPAN class=3D639143118-01072003>EAA Tech Councelor =
#4357</SPAN></DIV>
      <DIV><SPAN class=3D639143118-01072003></SPAN>&nbsp;</DIV>
      <BLOCKQUOTE dir=3Dltr style=3D"MARGIN-RIGHT: 0px">
        <DIV class=3DOutlookMessageHeader dir=3Dltr align=3Dleft><FONT=20
        face=3DTahoma>-----Original Message-----<BR><B>From:</B> <A=20
        =
href=3D"mailto:reflector-admin@tvbf.org">reflector-admin@tvbf.org</A>=20
        [mailto:reflector-admin@tvbf.org]<B>On Behalf Of </B>dean=20
        fitzbag<BR><B>Sent:</B> Sunday, June 29, 2003 1:00 =
PM<BR><B>To:</B>=20
        reflector<BR><B>Subject:</B> REFLECTOR:roll over=20
        jigs<BR><BR></FONT></DIV>
        <DIV>I am finished using the roll over jigs that I got form Alec =

        Balic.&nbsp;&nbsp; They are available to anyone who needs them =
for=20
        free.&nbsp; I&nbsp; live about 45 miles north of Dallas,=20
      =
Tx.</DIV></BLOCKQUOTE></BLOCKQUOTE></DIV></BLOCKQUOTE></BLOCKQUOTE></DIV>=
</BODY></HTML>

------=_NextPart_000_0086_01C3401C.142D9760--