REFLECTOR:Leading Edge Tape
Bob Kuc
reflector@tvbf.org
Wed, 3 Dec 2003 13:28:00 -0500
You could try the tape they use for HVAC duct. I do not know if it is
stainless or what but it will definitely give you a mean "paper" cut.
----- Original Message -----
From: "John Dibble" <aminetech@bluefrog.com>
To: <reflector@tvbf.org>
Sent: Wednesday, December 03, 2003 12:48 PM
Subject: Re: REFLECTOR:Leading Edge Tape
> Thanks, Alex,
>
> I've ordered a 2" roll. The people at IVO say they have tried this
> and the adhesive doesn't hold well. Any ideas on how to get better
> adhesion. It needs to be removable.
>
> John
>
> Alex Balic wrote:
>
> >JC Whitney sells Stainless steel "tape" it is probably about 0.003 or so,
it
> >is used for covering the rocker panels on cars for aesthetic purposes-
not
> >expensive either, but it is about 6" wide as I recall......the adhesive
is
> >pretty good...
> >
> >
> >
> >