BOUNCE reflector@awpi.com: Non-member submission from ["Tim Crawford" <Tim.Crawford@noaa.gov>]

[owner-reflector@awpi.com]

>From michalk@sisko.awpi.com  Tue Jul 20 11:51:41 1999
Received: from frd2.noaa.inel.gov (frd2.noaa.inel.gov [204.134.137.201])
	by sisko.awpi.com (8.9.0/8.9.0) with SMTP id LAA22715
	for <reflector@awpi.com>; Tue, 20 Jul 1999 11:51:39 -0500
Received: from tim (unverified [204.134.137.38]) by frd2.noaa.inel.gov
 (EMWAC SMTPRS 0.83) with SMTP id <B0000003270@frd2.noaa.inel.gov>;
 Tue, 20 Jul 1999 10:41:46 -0600
Message-ID: <B0000003270@frd2.noaa.inel.gov>
From: "Tim Crawford" <Tim.Crawford@noaa.gov>
To: "reflector@awpi.com" <reflector@awpi.com>
Date: Tue, 20 Jul 1999 10:56:31 -0600
Reply-To: "Tim Crawford" <Tim.Crawford@noaa.gov>
Priority: Normal
X-Mailer: PMMail 98 Standard (2.01.1600) For Windows 98 (4.10.1998)
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
Subject: Foam/Fuel Tanks

Hi Guys!

Some long time back (15yrs?) A product called something like
explos-o-safe was talked about in Sport aviation and the CP.  I
believe it was a shredded aluminum material.  A few builders got
excited about it and installed it in their aircraft.

The unexpected down side was that it trapped water.  You could sump
your tanks on the ground and find no water.  Then in flight, the
water could work its way out . . .   I believe there were accidents
attributed to the material.

I have talked to builders who cut their tanks open to remove the
material.  Makes one ask what is the down side of foam tanks?

Tim



-- 
Brian Michalk  <http://www.awpi.com/michalk>
Life is what you make of it ... never wish you had done something.
Aviator, experimental aircraft builder, motorcyclist, SCUBA diver
musician, home-brewer, entrepenuer and SINGLE!