[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
REFLECTOR: Reticulated Foam Specs/Prices
Below is the Info from the distributor.
I figure about 10 cu ft for the FG (including the sump).
If I can get 4 others, we have a good price. It still remains to be seen if
they will break up the order & ship directly or only ship to me and then I
would ship it out.
Larry Epstein
173 FGE
New Dimension Industries Bid Estimate
One State Street
Moonachie, NJ 07074-1402
201-641-4944 phone
201-641-3468 fax
www.newdimension-inc.com
Ship Via: Best Way
F.O.B.: Origin
Terms: Cash in Advance / Major Credit Card
Bid Date: Tuesday, July 20, 1999
This Bid Estimate Expires: October 19, 1999
G-15M Charcoal Quantity Price Amount
---------------------------- -------- ---------- -----------
Cubic Feet 2 $45.00 $90.00
Cubic Feet 10 $26.00 $260.00
Cubic Feet 50 $18.00 $900.00
Certified to Military Grade
G-15M Charcoal Quantity Price Amount
---------------------------- -------- ---------- -----------
Cubic Feet 2 $51.75 $103.50
Cubic Feet 10 $29.90 $299.00
Cubic Feet 50 $20.70 $1035.00
-----------
Quote Subtotal : $2687.50
Dimensional Tolerance:
+/-.125" Thickness, Length & Width
Minimum Purchase: 2 cubic ft
Lead-Time: 2 - 3 weeks
Thank You for the Opportunity to Submit This Bid Estimate
11 May 1995
New Dimension Industries Page 1 of 1
Product Specification Revision 2
Foam Grade G-15M Grade I
PROPERTY VALUES
Density Range (lbs./ft ) 1.2 - 1.5
Porosity(Air Pressure Drop)* 7.5 - 21
Air Pressure Drop (in water) 0.15 - 0.25
Tensile Strength (psi) 10.0 min.
Ultimate Elongation (percent) 100.0 min.
Tear Resistance (psi) 3.0 min.
Constant Deflection Compression Set (%) 45.0 max.
Compression Load Deflection @ 25% (psi) 0.35 min.
@ 65% (psi) 0.65 min.
Fuel Displacement (vol %) 2.50 max.
Fuel Retention (vol %)** 2.50 max.
Flammability (in/min) 15.0 max.
Extractable Materials (wt. %) 3.0 max.
Type I Fluid 0-15
Type II Fluid 0-40
JP-Turbine Fuel 0-25
Low Temp. Flexibility no cracking or breaking strands
Entrained Solid Contamination (mg/ft) 11-0 max
Steam Autoclave Exposure (% tensile loss) 30.0 max
ectrical Resistivity (ohm-cm) @ 75 F 1.0x10 to 5.0x10
Electrical Resistivity Uniformity @ 75 F 2 orders of magnitude
from top to bottom
*For information only (not for procurement certification)
**To be determined at the maximum air pressure drop limit
Test Method: MIL-F-87260 (USAF)
This information is furnished without warranty, representation, inducement,
or license of any kind, INCLUDING, BUT NOT LIMITED TO THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR USE OR PURPOSE, except that
it is accurate to the best of New Dimension Industries' knowledge or
obtained from sources believed by NDI to be accurate and NDI does not assume
any legal responsibility for use or reliance upon the same. Customers are
encouraged to conduct their own tests.
_______________________________________________________________
Get Free Email and Do More On The Web. Visit http://www.msn.com