[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

REFLECTOR: Fitting fuel baffles

To: reflector@awpi.com
Subject: REFLECTOR: Fitting fuel baffles
From: Jerryteits@aol.com
Date: Sun, 18 Jul 1999 18:11:07 EDT
Reply-To: reflector@awpi.com, Jerryteits@aol.com
Sender: owner-reflector@awpi.com

When I finished positioning the fuel baffles on the first side, I took the 
time to make a cardboard template of the shape of the fuel area.  The 
instructions are clear but it still left some latitude.  The template was 
made so that the fuel capacity of each side would be close as possible to 
identical.  Today, I transferred the shape to the other side.  Glad I saved 
the piece of cardboard.

Jerry Teitsma, working again on 173 EFG

Prev by Date: RE: REFLECTOR: Re: Speeds in Velocities.
Next by Date: Re: REFLECTOR: BOUNCE reflector@awpi.com: Non-member
Prev by thread: REFLECTOR: Flying
Next by thread: REFLECTOR: Reticulated Foam/Fuel Tanks
Index(es):
- Date
- Thread